FREE TO AIR DSTV CONFIG [Emmanuel Tv included]

DSTV DECODER SETTINGS
Press the Menu button on your remote
Press 7 for ADVANCED OPTIONS
Press 1 for Dish Installations
Enter Pin: 9949
You will see the Dish Installations menu

Change the settings to the following:
HOME NETWORK            Right next to it change name to DSTv Pas 7
Don’t enter Home Network’s Menu – Don’t change any settings.
Scroll to NETWORK 2
Right next to it change name to Other
Press OK to open Network 2’s menu and enter CODES
Satellite name: Pas 7/10
FREQ:     12722
SYMB RATE: 26657
FEC  :       ½
POLAR: VERTICAL
SCROLL to ACCEPT all VALUES and pres OK
Scan All Networks.
Wait for scan to finish.

PRESS the TV Button

PRESS OK
Press EXIT
Press LEFT or RIGHT arrow button for all Public Pas7/10 channels to show.
SCROLL to Emmanuel TV and PRESS OK
Take Note: If Emmanuel TV does not show as one of the channels on the Pass7/10 Menu then enter at Network 3 exactly what was entered at Network 2 and accept and scan all networks again.

OR

Scroll to NETWORK 3
Right next to it change name to other
Press OK to open Network 3’s menu and enter CODES
Satellite name: Pas 7/10
11170
SYMB RATE 26652
FEC         5/6
POLA VERTICAL
SCROLL to ACCEPT all VALUES and pres OK
You will be back at Dish Installations menu

SCROLL to SCAN ALL NEWORKS and press OK
Wait patiently until scan menu disappears (which indicates the end of scanning).
PRESS the TV Button

PRESS OK
Press EXIT
Press LEFT or RIGHT arrow button for all Public Pas7/10 channels to show.
SCROLL to Emmanuel TV and PRESS OK
Take Note: If Emmanuel TV does not show as one of the channels on the Pass7/10 Menu then enter at Network 3 exactly what was entered at Network 2 and accept and scan all networks again.

DSTV DECODER 110 SETTINGS
Press the Menu button on your remote
Press 7 for ADVANCED OPTIONS
Press 1 for Dish Installations.
Enter Pin: 9949
You will see the Dish Installations menu
Change the settings to the following:
HOME NETWORK Right next to it change name to DSTvIS7
Don’t enter Home Network’s Menu – Don’t change any settings.
Scroll to NETWORK 2
Right next to it change name to DSTv IS7 or DSTV W4
Press OK to open Network 2’s menu and enter CODES
FREQ     12722
SYMB RATE 26657
FEC         ½
POLA VERTICALL
SCROLL to ACCEPT all VALUES and press OK
You will be back at Dish Installations Menu

Scroll to NETWORK 3
Right next to it change name to DSTv IS7
Press OK to open Network 3’s menu and enter CODES
FREQ     11170
SYMB RATE 26652
FEC         5/6
POLAR VERTICAL
SCROLL to ACCEPT all VALUES and press OK
You will be back at Dish Installations Menu
SCROLL to SCAN ALL NETWORKS and press OK
Wait patiently until scan menu disappears (which indicates the end of scanning).
Press the TV Button
SCROLL to PUBLIC DSTv IS7/ or it might say 10PUBLIC DSTvW4/7
PRESS OK
Press EXIT
Press LEFT or RIGHT arrow button for all Public Pas7/10 channels to show.
SCROLL to Emmanuel TV and PRESS OK